Refactor GitHub Actions CI to a single workflow (#371)

* Refactor GitHub Actions CI to a single workflow

* Handle case where "ct lint" fails because of no chart changes

* Re-order scenarios

* Remove excessive default GC logging

* Bump cert-manager version to v1.12.2

* Use compatible cert-manager version

* Install debugging tools (k9s) for ssh access

* Only apply for interactive shells

* Fix JWT symmetric test

* Fix part that was missing from #356

* Install k9s on the fly when k9s is used

- set KUBECONFIG on the fly for kubectl too

.github/actions/ssh-access/action.yml

@@ -0,0 +1,161 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+name: ssh access
+description: Sets up SSH access to build VM with upterm
+inputs:
+  action:
+    description: |
+      Action to perform: options are "start" and "wait"
+      "start" will install, configure and start upterm.
+      "wait" will wait until a connection is established to upterm and will continue to wait until the session is closed.
+    required: false
+    default: 'start'
+  limit-access-to-actor:
+    description: 'If only the public SSH keys of the user triggering the workflow should be authorized'
+    required: false
+    default: 'false'
+  limit-access-to-users:
+    description: 'If only the public SSH keys of the listed GitHub users should be authorized. Comma separate list of GitHub user names.'
+    required: false
+    default: ''
+  secure-access:
+    description: |
+      Set to false for allowing public access when limit-access-to-actor and limit-access-to-users are unset.
+    required: false
+    default: 'true'
+  timeout:
+    description: 'When action=wait, the timeout in seconds to wait for the user to connect'
+    required: false
+    default: '300'
+runs:
+  using: composite
+  steps:
+    - run: |
+        if [[ "${{ inputs.action }}" == "start" ]]; then
+            echo "::group::Installing upterm & tmux"
+            if [[ "$OSTYPE" == "linux-gnu"* ]]; then
+                # install upterm
+                curl -sL https://github.com/owenthereal/upterm/releases/download/v0.7.6/upterm_linux_amd64.tar.gz | tar zxvf - -C /tmp upterm && sudo install /tmp/upterm /usr/local/bin/ && rm -rf /tmp/upterm
+            
+                # install tmux if it's not present
+                if ! command -v tmux &>/dev/null; then
+                    sudo apt-get -y install tmux
+                fi
+            elif [[ "$OSTYPE" == "darwin"* ]]; then
+                brew install owenthereal/upterm/upterm
+                # install tmux if it's not present
+                if ! command -v tmux &>/dev/null; then
+                    brew install tmux
+                fi
+            else
+                echo "Unsupported $OSTYPE"
+                exit 0
+            fi
+            echo '::endgroup::'  
+            echo "::group::Configuring ssh and ssh keys"
+            # generate ssh key
+            mkdir -p ~/.ssh
+            chmod 0700 ~/.ssh
+            if [ ! -f ~/.ssh/id_rsa ]; then
+                ssh-keygen -q -t rsa -N "" -f ~/.ssh/id_rsa
+            fi
+            if [ ! -f ~/.ssh/id_ed25519 ]; then
+                ssh-keygen -q -t ed25519 -N "" -f ~/.ssh/id_ed25519
+            fi
+            # configure ssh
+            echo -e "Host *\nStrictHostKeyChecking no\nCheckHostIP no\nTCPKeepAlive yes\nServerAliveInterval 30\nServerAliveCountMax 180\nVerifyHostKeyDNS yes\nUpdateHostKeys yes\n" > ~/.ssh/config
+            # Auto-generate ~/.ssh/known_hosts by attempting connection to uptermd.upterm.dev  
+            ssh -i ~/.ssh/id_ed25519 uptermd.upterm.dev || true
+            # @cert-authority entry is a mandatory entry when connecting to upterm. generate the entry based on the known_hosts entry key
+            cat <(cat ~/.ssh/known_hosts | awk '{ print "@cert-authority * " $2 " " $3 }') >> ~/.ssh/known_hosts
+            authorizedKeysParameter=""
+            authorizedKeysFile=${HOME}/.ssh/authorized_keys
+            if [[ "${{ inputs.secure-access }}" != "false" ]]; then
+                ssh-keygen -q -t ed25519 -N "$(echo $RANDOM | md5sum | awk '{ print $1 }')" -C "Prevent public access" -f /tmp/dummykey$$
+                cat /tmp/dummykey$$.pub >> $authorizedKeysFile
+                rm /tmp/dummykey$$ /tmp/dummykey$$.pub
+            fi
+            limit_access_to_actor="${{ inputs.limit-access-to-actor }}"
+            if [[ "${limit_access_to_actor}" == "true" ]]; then
+                echo "Adding ${GITHUB_ACTOR} to allowed users (identified by ssh key registered in GitHub)"
+                curl -s https://github.com/${GITHUB_ACTOR}.keys >> $authorizedKeysFile
+            fi
+            limit_access_to_users="${{ inputs.limit-access-to-users }}"
+            for github_user in ${limit_access_to_users//,/ }; do
+                if [[ -n "${github_user}" ]]; then
+                    echo "Adding ${github_user} to allowed users (identified by ssh key registered in GitHub)"
+                    curl -s https://github.com/${github_user}.keys >> $authorizedKeysFile
+                fi
+            done
+            if [ -f $authorizedKeysFile ]; then
+                chmod 0600 $authorizedKeysFile
+                authorizedKeysParameter="-a $authorizedKeysFile"
+                echo -e "Using $authorizedKeysFile\nContent:\n---------------------------"
+                cat $authorizedKeysFile
+                echo "---------------------------"
+            fi
+            echo '::endgroup::'  
+            echo "::group::Starting terminal session and connecting to server"
+            tmux new -d -s upterm-wrapper -x 132 -y 43 "upterm host ${authorizedKeysParameter} --force-command 'tmux attach -t upterm' -- tmux new -s upterm -x 132 -y 43"
+            sleep 2
+            tmux send-keys -t upterm-wrapper q C-m
+            sleep 1
+            tmux set -t upterm-wrapper window-size largest
+            tmux set -t upterm window-size largest
+            echo '::endgroup::'  
+            echo -e "\nSSH connection information"
+            # wait up to 10 seconds for upterm admin socket to appear
+            for i in {1..10}; do
+              ADMIN_SOCKET=$(find $HOME/.upterm -name "*.sock")
+              if [ ! -S "$ADMIN_SOCKET" ]; then
+                echo "Waiting for upterm admin socket to appear in ~/.upterm/*.sock ..."
+                sleep 1
+              else
+                echo "upterm admin socket available in $ADMIN_SOCKET"
+                break
+              fi
+            done
+            shopt -s nullglob
+            upterm session current --admin-socket ~/.upterm/*.sock || {
+              echo "Starting upterm failed."
+              exit 0
+            }
+        elif [[ "${{ inputs.action }}" == "wait" ]]; then
+            # only wait if upterm was installed
+            if command -v upterm &>/dev/null; then
+                shopt -s nullglob
+                echo "SSH connection information"
+                upterm session current --admin-socket ~/.upterm/*.sock || {
+                    echo "upterm isn't running. Not waiting any longer."
+                    exit 0
+                }
+                timeout=${{ inputs.timeout }}
+                echo "Waiting $timeout seconds..."
+                sleep $timeout
+                echo "Keep waiting as long as there's a connected session"
+                while upterm session current --admin-socket ~/.upterm/*.sock|grep Connected &>/dev/null; do
+                    sleep 30
+                done
+                echo "No session is connected. Not waiting any longer."
+            else
+                echo "upterm isn't installed"
+            fi
+        fi
+      shell: bash

.github/actions/tune-runner-vm/action.yml

@@ -24,6 +24,7 @@ runs:
   steps:
     - run: |
         if [[ "$OSTYPE" == "linux-gnu"* ]]; then
+            echo "::group::Configure and tune OS"
             # Ensure that reverse lookups for current hostname are handled properly
             # Add the current IP address, long hostname and short hostname record to /etc/hosts file
             echo -e "$(ip addr show eth0 | grep "inet\b" | awk '{print $2}' | cut -d/ -f1)\t$(hostname -f) $(hostname -s)" | sudo tee -a /etc/hosts
@@ -32,17 +33,22 @@ runs:
             # consumption is high.
             # Set vm.swappiness=1 to avoid swapping and allow high RAM usage
             echo 1 | sudo tee /proc/sys/vm/swappiness
+            (
+              shopt -s nullglob
               # Set swappiness to 1 for all cgroups and sub-groups
-            for swappiness_dir in /sys/fs/cgroup/memory/*/ /sys/fs/cgroup/memory/*/*/; do
+              for swappiness_file in /sys/fs/cgroup/memory/*/memory.swappiness /sys/fs/cgroup/memory/*/*/memory.swappiness; do
-              if [ -d "swappiness_dir" ]; then
+                echo 1 | sudo tee $swappiness_file > /dev/null
-                echo 1 | sudo tee $(swappiness_dir)memory.swappiness > /dev/null
-              fi
               done
+            ) || true
 
             # use "madvise" Linux Transparent HugePages (THP) setting
             # https://www.kernel.org/doc/html/latest/admin-guide/mm/transhuge.html
             # "madvise" is generally a better option than the default "always" setting
+            # Based on Azul instructions from https://docs.azul.com/prime/Enable-Huge-Pages#transparent-huge-pages-thp
             echo madvise | sudo tee /sys/kernel/mm/transparent_hugepage/enabled
+            echo advise | sudo tee /sys/kernel/mm/transparent_hugepage/shmem_enabled
+            echo defer+madvise | sudo tee /sys/kernel/mm/transparent_hugepage/defrag
+            echo 1 | sudo tee /sys/kernel/mm/transparent_hugepage/khugepaged/defrag
     
             # tune filesystem mount options, https://www.kernel.org/doc/Documentation/filesystems/ext4.txt
             # commit=999999, effectively disables automatic syncing to disk (default is every 5 seconds)
@@ -71,12 +77,26 @@ runs:
             # stop Azure Linux agent to save RAM
             sudo systemctl stop walinuxagent.service || true
           
+            # enable docker experimental mode which is
+            # required for using "docker build --squash" / "-Ddocker.squash=true"
+            daemon_json="$(sudo cat /etc/docker/daemon.json  | jq '.experimental = true')"
+            echo "$daemon_json" | sudo tee /etc/docker/daemon.json
+            # restart docker daemon
+            sudo systemctl restart docker
+            echo '::endgroup::'
+
             # show memory
+            echo "::group::Available Memory"
             free -m
+            echo '::endgroup::'
             # show disk
-            df -h
+            echo "::group::Available diskspace"
+            df -BM
+            echo "::endgroup::"
             # show cggroup
-            echo "/actions_job cgroup settings:"
+            echo "::group::Cgroup settings for current cgroup $CURRENT_CGGROUP"
-            sudo cgget actions_job
+            CURRENT_CGGROUP=$(cat /proc/self/cgroup | grep '0::' | awk -F: '{ print $3 }')
+            sudo cgget -a $CURRENT_CGGROUP || true
+            echo '::endgroup::'
         fi
       shell: bash

.github/workflows/lint.yml

@@ -1,68 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Helm Chart Lint
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-        
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-        with:
-          fetch-depth: 0
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Set up Helm
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-        uses: azure/setup-helm@v3
-        with:
-          version: v3.10.0
-
-      - name: Set up Python
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.9'
-
-      - name: Set up chart-testing
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-        uses: ./.github/actions/chart-testing-action
-
-      - name: Run chart-testing (lint)
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-        run: ct lint --check-version-increment=false --validate-maintainers=false --target-branch ${{ github.event.repository.default_branch }}

.github/workflows/pulsar-helm-chart-ci.yaml

@@ -0,0 +1,292 @@
+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+name: Pulsar Helm Chart CI
+on:
+  pull_request:
+    branches:
+      - master
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  preconditions:
+    name: Preconditions
+    runs-on: ubuntu-22.04
+    if: (github.event_name != 'schedule') || (github.repository == 'apache/pulsar-helm-chart')
+    outputs:
+      docs_only: ${{ steps.check_changes.outputs.docs_only }}
+
+    steps:
+      - name: checkout
+        uses: actions/checkout@v3
+
+      - name: Detect changed files
+        id:   changes
+        uses: apache/pulsar-test-infra/paths-filter@master
+        with:
+          filters: .github/changes-filter.yaml
+          list-files: csv
+
+      - name: Check changed files
+        id: check_changes
+        run: |
+          if [[ "${GITHUB_EVENT_NAME}" != "schedule" && "${GITHUB_EVENT_NAME}" != "workflow_dispatch" ]]; then
+            echo "docs_only=${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}" >> $GITHUB_OUTPUT
+          else
+            echo docs_only=false >> $GITHUB_OUTPUT
+          fi
+
+  license-check:
+    needs: preconditions
+    name: License Check
+    runs-on: ubuntu-22.04
+    timeout-minutes: 10
+    if: ${{ needs.preconditions.outputs.docs_only != 'true' }}
+    steps:
+      - name: Set up Go 1.12
+        uses: actions/setup-go@v1
+        with:
+          go-version: 1.12
+        id: go
+
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v3
+
+      - name: Check license
+        run: |
+          go test license_test.go
+
+  # run "ct lint" https://github.com/helm/chart-testing/blob/main/doc/ct_lint.md
+  ct-lint:
+    needs: ['preconditions', 'license-check']
+    name: chart-testing lint
+    runs-on: ubuntu-22.04
+    timeout-minutes: 45
+    if: ${{ needs.preconditions.outputs.docs_only != 'true' }}
+    outputs:
+      no_chart_changes: ${{ steps.ct-lint.outputs.no_chart_changes }}
+    steps:
+      - name: checkout
+        uses: actions/checkout@v3
+
+      - name: Tune Runner VM
+        uses: ./.github/actions/tune-runner-vm
+
+      - name: Setup ssh access to build runner VM
+        # ssh access is enabled for builds in own forks
+        if: ${{ github.repository != 'apache/pulsar-helm-chart' && github.event_name == 'pull_request' }}
+        uses: ./.github/actions/ssh-access
+        continue-on-error: true
+        with:
+          limit-access-to-actor: true
+
+      - name: Set up Helm
+        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
+        uses: azure/setup-helm@v3
+        with:
+          version: v3.10.0
+
+      - name: Set up Python
+        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.9'
+
+      - name: Set up chart-testing
+        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
+        uses: ./.github/actions/chart-testing-action
+
+      - name: Run chart-testing (lint)
+        id: ct-lint
+        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
+        run: |
+          ct lint --check-version-increment=false \
+            --validate-maintainers=false \
+            --target-branch ${{ github.event.repository.default_branch }} \
+            | tee /tmp/ct-lint.log || { 
+            if grep -q "No chart changes detected." /tmp/ct-lint.log; then
+              echo no_chart_changes=true >> $GITHUB_OUTPUT
+              exit 0
+            else
+              echo no_chart_changes=false >> $GITHUB_OUTPUT
+              exit 1
+            fi
+          }
+
+      - name: Wait for ssh connection when build fails
+        # ssh access is enabled for builds in own forks
+        uses: ./.github/actions/ssh-access
+        if: ${{ failure() && github.repository != 'apache/pulsar-helm-chart' && github.event_name == 'pull_request' }}
+        continue-on-error: true
+        with:
+          action: wait
+
+  install-chart-tests:
+    name: ${{ matrix.name }} - Install
+    runs-on: ubuntu-22.04
+    timeout-minutes: ${{ matrix.timeout || 45 }}
+    needs: ['preconditions', 'ct-lint']
+    if: ${{ needs.preconditions.outputs.docs_only != 'true' }}
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - name: Basic
+            values_file: .ci/clusters/values-local-pv.yaml
+            shortname: basic
+          - name: Pulsar Function
+            values_file: .ci/clusters/values-function.yaml
+            shortname: function
+          - name: Use Pulsar Image
+            values_file: .ci/clusters/values-pulsar-image.yaml
+            shortname: pulsar-image
+          - name: JWT Asymmetric Keys
+            values_file: .ci/clusters/values-jwt-asymmetric.yaml
+            shortname: jwt-asymmetric
+          - name: JWT Symmetric Key
+            values_file: .ci/clusters/values-jwt-symmetric.yaml
+            shortname: jwt-symmetric
+          - name: TLS
+            values_file: .ci/clusters/values-tls.yaml
+            shortname: tls
+          - name: Broker & Proxy TLS
+            values_file: .ci/clusters/values-broker-tls.yaml
+            shortname: broker-tls
+          - name: BK TLS Only
+            values_file: .ci/clusters/values-bk-tls.yaml
+            shortname: bk-tls
+          - name: ZK TLS Only
+            values_file: .ci/clusters/values-zk-tls.yaml
+            shortname: zk-tls
+          - name: ZK & BK TLS Only
+            values_file: .ci/clusters/values-zkbk-tls.yaml
+            shortname: zkbk-tls
+                      
+    steps:
+      - name: checkout
+        uses: actions/checkout@v3
+
+      - name: Tune Runner VM
+        uses: ./.github/actions/tune-runner-vm
+
+      - name: Setup debugging tools for ssh access
+        if: ${{ github.repository != 'apache/pulsar-helm-chart' && github.event_name == 'pull_request' }}
+        run: |
+          cat >> $HOME/.bashrc <<'EOF'
+          function use_kind_kubeconfig() {
+            export KUBECONFIG=$(ls $HOME/kind/pulsar-ci-*/kubeconfig.yaml)
+          }
+
+          function kubectl() {
+            # use kind environment's kubeconfig
+            if [ -z "$KUBECONFIG" ]; then
+              use_kind_kubeconfig
+            fi
+            command kubectl "$@"
+          }
+
+          function k9s() {
+            # use kind environment's kubeconfig
+            if [ -z "$KUBECONFIG" ]; then
+              use_kind_kubeconfig
+            fi
+            # install k9s on the fly
+            if [ ! -x /usr/local/bin/k9s ]; then
+              echo "Installing k9s..."
+              curl -L -s https://github.com/derailed/k9s/releases/download/v0.27.4/k9s_Linux_amd64.tar.gz | sudo tar xz -C /usr/local/bin k9s
+            fi
+            command k9s "$@"
+          }
+          EOF
+          cat >> $HOME/.bash_profile <<'EOF'
+          if [ -f ~/.bashrc ]; then
+            source ~/.bashrc
+          fi
+          EOF
+
+      - name: Setup ssh access to build runner VM
+        # ssh access is enabled for builds in own forks
+        if: ${{ github.repository != 'apache/pulsar-helm-chart' && github.event_name == 'pull_request' }}
+        uses: ./.github/actions/ssh-access
+        continue-on-error: true
+        with:
+          limit-access-to-actor: true
+
+      - name: Run chart-testing (install)
+        run: |
+          case "${{ matrix.shortname }}" in
+            "jwt-symmetric")
+              export SYMMETRIC=true
+              ;;
+          esac
+          .ci/chart_test.sh ${{ matrix.values_file }}
+
+      - name: Collect k8s logs on failure
+        if: ${{ cancelled() || failure() }}
+        continue-on-error: true
+        shell: bash
+        run: |
+          source .ci/helm.sh
+          set +e
+          ci::collect_k8s_logs
+
+      - name: Upload k8s logs on failure
+        uses: actions/upload-artifact@v2
+        if: ${{ cancelled() || failure() }}
+        continue-on-error: true
+        with:
+          name: k8s-logs-${{ matrix.shortname }}
+          path: /tmp/k8s-logs
+          retention-days: 7
+          if-no-files-found: ignore          
+
+      - name: Wait for ssh connection when build fails
+        # ssh access is enabled for builds in own forks
+        uses: ./.github/actions/ssh-access
+        if: ${{ failure() && github.repository != 'apache/pulsar-helm-chart' && github.event_name == 'pull_request' }}
+        continue-on-error: true
+        with:
+          action: wait
+
+  # This job is required for pulls to be merged.
+  # It depends on all other jobs in this workflow.
+  pulsar-helm-chart-ci-checks-completed:
+    name: "CI checks completed"
+    if: ${{ always() && ((github.event_name != 'schedule') || (github.repository == 'apache/pulsar-helm-chart')) }}
+    runs-on: ubuntu-22.04
+    timeout-minutes: 10
+    needs: [
+      'preconditions',
+      'license-check',
+      'install-chart-tests'
+    ]
+    steps:
+      - name: Check that all required jobs were completed successfully
+        if: ${{ needs.preconditions.outputs.docs_only != 'true' }}
+        run: |
+          if [[ ! ( \
+                   "${{ needs.license-check.result }}" == "success" \
+                && "${{ needs.install-chart-tests.result }}" == "success" \
+               ) ]]; then
+            echo "Required jobs haven't been completed successfully."
+            exit 1
+          fi

.github/workflows/pulsar.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (Basic Installation)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Install chart
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-local-pv.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_bk_tls.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (BK TLS Only)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Run chart-testing (install)
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-bk-tls.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_broker_tls.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (Broker & Proxy TLS Installation)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-  
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Run chart-testing (install)
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-broker-tls.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_function.yml

@@ -1,74 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (Pulsar Function)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-  
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Install chart
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-function.yaml
-        env:
-          FUNCTION: "true"
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_image.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (Use Pulsar Image)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Install chart
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-pulsar-image.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_jwt_asymmetric.yml

@@ -1,74 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (JWT Secret Key Installation)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Run chart-testing (install)
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-jwt-asymmetric.yaml
-        env:
-          SYMMETRIC: "false"
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_jwt_symmetric.yml

@@ -1,74 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (JWT Public/Private Key Installation)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Run chart-testing (install)
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-jwt-symmetric.yaml
-        env:
-          SYMMETRIC: "true"
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_tls.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (TLS Installation)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Install chart
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-tls.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_zk_tls.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (ZK TLS Only)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Install chart
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-zk-tls.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/pulsar_zkbk_tls.yml

@@ -1,72 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit - Pulsar Helm Chart (ZK & BK TLS Only)
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  lint-test:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-      - name: checkout
-        uses: actions/checkout@v2
-
-      - name: Tune Runner VM
-        uses: ./.github/actions/tune-runner-vm
-
-      - name: Detect changed files
-        id:   changes
-        uses: apache/pulsar-test-infra/paths-filter@master
-        with:
-          filters: .github/changes-filter.yaml
-
-      - name: Check changed files
-        id: check_changes
-        run: echo "::set-output name=docs_only::${{ fromJSON(steps.changes.outputs.all_count) == fromJSON(steps.changes.outputs.docs_count) && fromJSON(steps.changes.outputs.docs_count) > 0 }}"
-
-      - name: Install chart
-        run: |
-          .ci/chart_test.sh .ci/clusters/values-zkbk-tls.yaml
-        # Only build a kind cluster if there are chart changes to test.
-        if: ${{ steps.check_changes.outputs.docs_only != 'true' }}
-
-      - name: Collect k8s logs on failure
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        shell: bash
-        run: |
-          source .ci/helm.sh
-          set +e
-          ci::collect_k8s_logs
-
-      - name: Upload k8s logs on failure
-        uses: actions/upload-artifact@v2
-        if: ${{ cancelled() || failure() }}
-        continue-on-error: true
-        with:
-          name: k8s-logs
-          path: /tmp/k8s-logs

.github/workflows/style.yml

@@ -1,48 +0,0 @@
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-name: Precommit Style Check
-on:
-  pull_request:
-    branches:
-      - '*'
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-
-  build:
-    name: Build
-    runs-on: ubuntu-22.04
-    timeout-minutes: 45
-    steps:
-    - name: Set up Go 1.12
-      uses: actions/setup-go@v1
-      with:
-        go-version: 1.12
-      id: go
-
-    - name: Check out code into the Go module directory
-      uses: actions/checkout@v2
-
-    - name: Check license
-      run: |
-        go test license_test.go

charts/pulsar/templates/proxy-configmap.yaml

@@ -30,7 +30,7 @@ data:
   clusterName: {{ template "pulsar.cluster.name" . }}
   statusFilePath: "{{ template "pulsar.home" . }}/status"
   # prometheus needs to access /metrics endpoint
-  webServicePort: "{{ .Values.proxy.ports.http }}"
+  webServicePort: "{{ .Values.proxy.ports.containerPorts.http }}"
   {{- if or (not .Values.tls.enabled) (not .Values.tls.proxy.enabled) }}
   servicePort: "{{ .Values.proxy.ports.pulsar }}"
   brokerServiceURL: pulsar://{{ template "pulsar.fullname" . }}-{{ .Values.broker.component }}:{{ .Values.broker.ports.pulsar }}
@@ -39,7 +39,7 @@ data:
   {{- if and .Values.tls.enabled .Values.tls.proxy.enabled }}
   tlsEnabledInProxy: "true"
   servicePortTls: "{{ .Values.proxy.ports.pulsarssl }}"
-  webServicePortTls: "{{ .Values.proxy.ports.https }}"
+  webServicePortTls: "{{ .Values.proxy.ports.containerPorts.https }}"
   tlsCertificateFilePath: "/pulsar/certs/proxy/tls.crt"
   tlsKeyFilePath: "/pulsar/certs/proxy/tls.key"
   tlsTrustCertsFilePath: "/pulsar/certs/ca/ca.crt"

charts/pulsar/values.yaml

@@ -574,11 +574,6 @@ bookkeeper:
       -XX:-ResizePLAB
       -XX:+ExitOnOutOfMemoryError
       -XX:+PerfDisableSharedMem
-      -Xlog:gc*
-      -Xlog:gc::utctime
-      -Xlog:safepoint
-      -Xlog:gc+heap=trace
-      -verbosegc
     # configure the memory settings based on jvm memory settings
     dbStorage_writeCacheMaxSizeMb: "32"
     dbStorage_readAheadCacheMaxSizeMb: "32"

scripts/cert-manager/install-cert-manager.sh

@@ -24,7 +24,8 @@ set -e
 
 NAMESPACE=cert-manager
 NAME=cert-manager
-VERSION=v1.7.3
+# check compatibility with k8s versions from https://cert-manager.io/docs/installation/supported-releases/
+VERSION=v1.11.4
 
 # Install cert-manager CustomResourceDefinition resources
 echo "Installing cert-manager CRD resources ..."